WDS_Automation_Catalogue

677 / 816

SECTION 21 - SPENCER FRANKLIN HYDRACLAMP, HYDRAULICS
AND PNEUMATICS WDS
& 0845 606 66 77 • : • * 21-8
WDS
A B D E F G H J K (g) WDS No.
152 267 152 248 117 229 324 203 22 68 SF-1600M
PowRlock
Hydraclamp Super
Major Type
SF-1600M
TECHNICAL INFORMATION -
Hydraulic Operation: MAJOR TYPE
1600M
Maximum loading: 750kg 300mm
from Ball Centre at 45 degrees
The largest model in the HYDRACLAMP range, the Super Major is capable of supporting work weighing up to three quarters of a ton. As the vertical movement of
weights of this magnitude is beyond human capacity the slot machine in the turret of all other HYDRACLAMPS is eliminated. This enables the ball arm to rotate
between two sets of roller bearings which ensures that the work can be moved slightly if required and at all times without friction between the ball arm and the turret.
Hydraulic control of the movement in arc of the ball arm ensures that the ball arm and the turret become virtually as one. In consequence the workpiece remains
immovable even under conditions of high leverage and maximum weight.
The pre-optive sleeve is still incorporated to enable any desired degree of sustained pressure to be applied and maintained. The basic unit is controlled by an angled
Capstan.
Foot control is offered as an alternative and this is effected by the use of the same compact intensifier as for the Major HYDRACLAMP.
Use plunger 6P28568 instead of 1663 with intensifier control.
-
$
)
DSSUR[
*
%
+ROHV LQ IDFHSODWH
0 RQ SFG
'
(
.
+
Application
Please Note: Face Plate is not shown in the photo
Refer to page 21-47 for Oil Grades